スパークリングワインのボトル　フレシネ

ガラスも厚くて重いのでランプに使えそう

５VのLED電球使用

充電池式ランプにしてみた

obniz IoT WiFi to cloud

Used "obniz boards" to sense the status lights.

https://obniz.io/

12  programmable IO ports

WiFi connection to server.

We send the data to Drop box

watch data from web browser

IchigoMilk a BASIC board computer

Original design by TeamIse

IchigoMilk  for Kids

Upper compatible with IchigoJam

MCU    1114

Features
On board EEPROM
Serial IF terminal
Audio Jack

On board BASIC interpreter
Program strage memory
Simple screen Editor

NTSC Video out
Keyboard input
5v input



https://www.facebook.com/IchigoTeamIse/

Original Switch Pad: Ichigo Pad

Original Switch Pad for   IchigoJam or other board computers

Switch and LED board  Original Design by team ise
https://www.facebook.com/IchigoTeamIse/

4 button switches
 para mode : 4 pulled up terminals
*Analog mode: Single 16 level analog output by 4 buttons combination

8 LEDs
para mode : 8 direct-in terminals
*Serial mode: Single self synchronized input for 8 LEDs
 
Feature
Simple Interface uses minimum I/O port
*use only one terminal can detect combination of 4 swithes 16 levels in 0 to 3.3V
*use only one terminal can send 8 LEDs individually by pulse width modulation
            

IchigoJam Choco Vendor with a card reader

Just verify the card insertion.
Enables one pc of  choco vending out by hitting the red button.

IchigoJam Choco Vendor 2 チロルチョコベンダー続

IchigoJam Choco Vendor + Card Reader

 

Gave up to make a coin accepter then used a card reader instead.

 

Just sense the card insertion and it enables the button switch.

 

コインアクセプタをつくるのは、たいへんなので、カード挿入式にした。

といっても、挿入確認だけ。

 

カードを入れると、一回だけチロルチョコボタンが押せる。

 

・タミヤのギヤー　は、最低速にしたので、トルクが強い。チロルが詰まると固まる。

モーターはOFFにしても惰性で動く。

 

 

IchigoJam Choco Vendor チロルチョコベンダー

Made this

Proto 0.1
Tested:  Circular motion to liner sliding  motion to push the choco out.
              SW the Tamiya Motor by a tr with OUTPUT of IchigoJam.
              Controlled by the IchigoJam(LPC1114)  and BASIC programming


タミヤのギヤーボックスを使用。モーターをトランジスタで制御。

BASIC programming

Wait the start  tact switch ON
Start motor
Timer(TICK) reset for "timeout"
Wait the limit switch ON
Stop the motor after WAIT for the  point
Monitor the HALT swith to avoid the overload bcause of  jamming choco

Next project

Coin acceptor